Description
Argon Wine Adapter® w/ Regulator and 10 ft hose for use with Vinotemp
Argon Wine Adapter® w/ Regulator and 10 ft hose for use with Vinotemp
$240.00
ARGON WINE ADAPTER® NOT AFFILIATED WITH VINOTEMP
Very simple installation : Hand tighten regulator to cylinder of argon and Connected end to Vinotemp . Instead of screwing in the small cylinder , Turn the screw end to tighten .
Additional information
| Weight | 3 lbs |
|---|---|
| Dimensions | 8 × 5 × 4 in |
Delivery and Returns Content description.
Related products
-
MY argon wine adapter handle is REFILLABLE. Just connect the quick disconnect to the handle and in 1 second the handle is charged with enough argon to fill 3 to 13 five once glasses, depending on how much pressure is coming out of the regulator. My refillable handle has been pressure test to 1000 psi. My recommendation is 500 and lower due to high pressures. I have a quick disconnect on the end of the hose, much like a air hose connection. There is also a slide check valve , allowing to turn off the gas at the line, not the tank. I would advise to shut off gas after every fill up to avoid accidental opening of the slide check valve. This device will attachedto all my other quick disconnects products I have sold. -
My screw on cartridge refillable handle will allow you to remove the hose and use your wine device not attached to tank. Hose is only attached during refill. This set up comes with regulator, hose and refillable handle. This system has been test to 1000 psi. Refill handle must be attached to wine dispenser to fill.
