Description
MY argon wine adapter handle is REFILLABLE. Unscrew your capsule holder and empty capsule and screw in the refillable handle. Connect the quick disconnect to the handle. Turn on the gas at the tank , make sure slide check is up position and in 1 second the handle is charged with enough argon to fill 5 to 7 five once glasses,depending on how much pressure is coming out of the regulator. My refillable handle has been pressure test to 1000 psi. My recommendation is 500 and lower due to high pressures. I have a quick disconnect on the end of the hose, much like a air hose connection. There is also a slide check valve , allowing to turn off the gas at the line sliding it up for on and down for off. I would advise to shut off gas at the tank after every fill up to avoid accidental opening of the slide check valve. This device will attached to all my other quick disconnects products I have sold.
Instructions for Refillable Handle.
1. Install regulator to gas cylinder
Hand tighten is good.
2. Install refillable handle to Coravin.
3. Install quick disconnect to refillable handle.
4. Move slide check black ring to the down position. (off).
5. Turn on gas at cylinder (tank).
6. Move check slide black ring to up position (on, fill)
after 2 seconds handle is filled.
7. Move slide check down (off),
there will be a wushing sound of some gas escaping
this is normal.
8. Remove quick disconnect. and shut off gas at tank.
and ENJOY !!!
